Packaging Equipment
      ProductsContact M-PakUsed EquipmentReplacement PartsVideo LibraryLeasing

Since 1989
Hot Stamp Imprinters
HomeAbout M-PakContact M-PakUsed EquipmentReplacement PartsLeasingTech TipsSite Map

M-Pak Systems, Inc, PO Box 13544, Greensboro, NC  27415Ph:  336.378.6036 Fx:  336.378.6037Email:  mpaksys@bellsouth.net
Add this page to your favorites.
M-Pak Systems Inc
Since 1989
The hot stamp imprinter, DY-8 is compatible with Model RS-20 (IT-863A). It is used to print expiration dates, manufacturers' codes, lot numbers or other information onto different types of materials. This unit is a tabletop model equipped with a hand activation bar on the right side of the unit. The unit is capable of 1-3 lines of print and each line can hold 12 characters or type. The working temperature is 150-200 C (300-390 F). The temperature is maintained by an adjustable thermostat control to provide consistent printing temperature. The print dries as soon as it is printed. The machine is very easy to use and maintain. Very easy to change the typeset. Additional typesets are available.
Imprinter comes with 1 roll of 30mm ribbon, 3 pieces each of number 0-9, 2 pieces each of "LOT", "EXP", & "MFG".  120 Volt AC, 40 watts.

Price .............  $285.00
Direct Heat Coding Machine - DY-8
This imprinter can be mounted on any foot-operated sealer. Imprinting coincides with the lowering of the upper jaw. Sealing and printing is done in one single operation. Capable of 3 line imprinting, and each line can hold 9 characters. The imprinter includes 1 number set (0-9, 3 of each number) and 2 of "MFG", "EXP" and "LOT" each. It uses 25mm width ribbon. Working temperature is 250-300 degree (C) or 480-570 (F).   120 Volts AC, 40 watts.

   Price ........   $395.00
Mountable Imprinter - IT-863 (RS-8)
Tabletop Imprinter - IT-86A3 (RS-20)
IT-86A3 is a table top model equipped with a hand activation bar on the right side. It is capable of 3 line imprinting, and each line can hold 9 characters. It comes with a number set (0-9, 3 of each number)and 2 of "MFG", "EXP", and "LOT" each. Uses 25mm width ribbon. Working temperature is 250-300 degree (C) or 480-570 (F).
120 Volts, 40 watts.


Price .......  $472.50
Semi-Auto Imprinter - HP-280
HP-280 is a semiautomatic, table-top imprinter using ribbon. Equipped with automatic eye sensor and electric foot pedal. On the automatic mode, the timing or speed can be set with a control knob. The printing speed range is from 20-70 imprints/minute. On the foot-controlled mode, the imprinting is controlled by using the foot pedal switch. Ribbon up to maximum width of 35mm can be used. Equipped with vertical and horizontal guides. Pressure of imprinting can be adjusted easily. It has 3 line imprinting and each line can hold 11 letters or numbers. Comes with 5 number sets (0-9), 1 alphabet set (A-Z), 5 of blank/space, 5 of dot, and 3 sets of "MFG", "EXP", "LOT."  120 Volts AC, 200 watts.

Price  ............  $918.00

Automatic Imprinter - MY-380F
MY-380F is an automatic dry-ink roller coding machine. Its lengthway printing position is controlled by an electronic device and can be adjusted easily. Ideal for printing any object ranging in size from 2"-19" long and 1" to 11" wide. The maximum speed of imprinting is 300 pieces per minute. The maximum printing size is 60 mm x 250 mm, this can accommodate 5 lines and 10 characters per line.  120 Volts AC, 180 watts.

  Price .........   $2160.00
Mounted on Foot Sealer
Hot Stamp Imprinter Ribbon
High quality hot stamp ribbons produce superior print quality and scratch resistant prints. The inks are nontoxic and heavy-metal free. The ribbons are produced by high tech mixing and coating operations to assure consistent quality. Tightly wound rolls prevent telescoping. The ribbon comes in 110yds (330 feet) rolls. Available in 2 sizes, 25mm and 30mm. A variety of colors are available including black, red, blue, white, gold and gray. The rolls are very economical and based on 1/2"-3/4" lengths per print, one roll can produce 6,000-8,000 prints.
Ribbon ............  $9.75 each
Mountable Imprinter - AIE-663
Mounted on a bag sealer, the AIE-663 allows sealing and printing in one operation. Quick and easy use for printing on poly bags, and paper. For manufacturers of all types of products that need to code, date, number to identify with a permanent mark. Capable imprinting up to 3 lines, and each line can hold 9 characters. The imprinter includes character set and 2 of "MFG", "EXP" and "LOT" each. It uses 25mm width ribbon. Working temperature is 250-300 degree (C) or 480-570 (F).   120 Volts AC, 40 watts.

AIE-663  ...............  $425.00
Typical Imprint Sample
Direct heat Hot Stamp Imprinters can be used to print date, code, or other information on any poly bag, poly case, paper bag, aluminum or other material. Easy to use and provide a distinct print. Equipped with an adjustable thermostat to control the imprinting temperature. Instantaneous dry and non-sticking. Convenient to change type set. Several colors of ribbon are available: red, yellow, blue, white, black, and green. 25 mm wide color ribbon is used for all imprinters except for the automatic MY-380F, which uses an ink roller. The characters are 3-4 mm x 1.5-2 mm in sizes. Usually 8 -11 characters can be printed per line using a 25 mm size ribbon. Optional A-Z letter set is available.