Clamco® Aftermarket Shrink Wrap Parts Prices
M-Pak maintains an extensive inventory of aftermarket shrink wrapper parts for Clamco® Shrink Wrap machines. If you do not find it listed here, please give us a call. Check out our L-Sealer rebuild kits. You can rebuild your L-Sealer for $150.
Price and availability subject to change without notice. Call to verify pricing.
Many of the replacement parts shown on this web page are aftermarket parts and not those of the original equipment manufacturer nor are they approved by them. The part numbers of the original equipment manufacturer are for reference only.
| Clamco Shrink L-Sealer Parts | ||||
| M-Pak # | Mfr's # | Description | UM | Price |
| NI036C25 | Wire, 25'/coil (Models 110, 120, & 770 Series) | coil | $15.80 | |
| NI036C50 | 218-18 | Wire, 50'/coil (Models 110, 120, & 770 Series) | coil | $29.85 |
| CLA010 | Teflon Tape 3/4"x 10 mil x 10 yd | roll | $23.21 | |
| CLA011 | 228-8 | Teflon Tape 1/2"x 10 mil x 10 yd | roll | $14.48 |
| CLA012 | Teflon Tape 2"x3 mil x10 yd | roll | $32.00 | |
| CLA001 | 817-10 | Insulator Strip. 36" (Models 110, 120, & 770 Series) | ea | $29.90 |
| CLA003 | 818-8 | Seal Pad, 36" (Models 110, 120, & 770 Series) | ea | $22.50 |
| CLA005 | 77-220 | Tension Block, Sealing Arm (Side) | ea | $28.30 |
| CLA006 | 77-222 |
Tension Block, Support Arm (Front) (old style - prior to 1993) |
ea | $42.10 |
| CLA007 | 77-1250 | Tension Block, Support Arm (Front) all models (after 1992 w/ film clamps) | ea | $42.10 |
| CLA008 | 77-225 | Tension Pin | ea | $44.30 |
| CLA009 | 77-46 | Tension Spring | ea | $6.50 |
| CLA015 | 235-53 | Control Board for 120 & 770 & 5000 Series L-Sealer (EEJ88TV) | ea | $153.70 |
| CLA300 | 235-33 | Timer Assy 110 | ea | Call |
| 57-39 | L-Kit Rebuild Kit 1/2" tape, 2" tape, insulator strip, sponge, seal wire | ea | $150.00 | |
| CLA305 | 215-27 | Microswitch, Element 110, 120, others | ea | |
| CLA025 | 77-333 | Teflon Sleeve - Seal Arm - 14 x 14 | ea | |
| CLA030 | 77-334 | Teflon Sleeve - Seal Arm - 14 x 20 | ea | |
| CLA100 | Conveyor Belt, Take Away, for Model 770-20 | ea | $165.00 | |
| CLA101 | Conveyor Belt, Take Away, for Model 770-36 | ea | $195.00 | |
| CLA102 | Conveyor Belt, Take Away, for Model 772-20 | ea | $175.00 | |
| CLA100 | Conveyor Belt, Take Away, for Model 772-36 | ea | $225.00 | |
| CLA103 | Conveyor Belt, Take Away, for Model 773-36 | ea | $355.00 | |
| CLA201 | 5750 | Return Cylinder, Seal Jaw 772 (need s/n) | ea | $173.30 |
| Rebuild Kit for 770-14, 770-20, 772-20 | ea | $99.90 | ||
| Rebuild Kit for 770-36, 772-20, 772-20 | ea | $129.90 | ||
| Clamco Shrink Tunnel Parts | ||||
| M-Pak # | Mfr's # | Description | UM | Price |
| CLA625 | 74-2130 | Insulator Board | ea | $60.10 |
| CLA600 | 74-2125 | Heater, Tubular 120 series upper | ea | $99.20 |
| CLA612 | 225-21 | Heater, Flat 110 series bottom | ea | $142.70 |
| CLA700 | 201-2 | Thermostat, 110, 120 Series | ea | $121.80 |
| CLA705 | 203-11 | Powerstat, Conveyor 115 VAC (110) | ea | |
| CLA650 | 827-45 | Blower Wheel, 120 series | ea | $86.80 |
| CLA655 | 230-17 | Blower Motor 110 series | ea | |
| CLA670 | 230-27 | Gearmotor, Conveyor (Von Weiss) PTA 110, 120 (old style 3/8 shaft) | ea | OBS |
| CLA671 | 230-148 | Gearmotor, Conveyor 120 Tunnel (1/2" shaft - requires sprocket w/ 230-27 repl) | ea | $318.00 |
| CLA672 | 230-69 | Gearmotor, Conveyor 852 Tunnel (Leeson) | ea | $430.00 |
| CLA750 | 829-41 | Insulation Blanket, 2'x4'x1", Type 2, Thermal TIW | ea | $10.10 |
| CLA600 | 807-41 | Conveyor Belt, Mesh (120 Combo Tunnel) | ea | $299.90 |
| CLA601 | Conveyor Belt, Mesh (Model 850-MB) | ea | $325.10 | |
| CLA607 | Conveyor Belt, Mesh (Model 852-MB) | ea | $325.10 | |
| CLA604 | 73-760 | Conveyor Belt, Mesh w/ teflon pin (110 Combo Tunnel) | ea | $325.10 |
| CLA611 | 73-891 | Conveyor Belt, Solid Sil (110 Combo Tunnel) | ea | $275.85 |
| CLA602 | Conveyor Belt, Mesh (Model 854-MB) 30 x 154 | ea | $325.10 | |
| CLA607 | Conveyor Belt, Mesh (Model 854-MB) 30 x 164 (Newer) | ea | $325.10 | |
| CLA606 | Conveyor Belt, Mesh (Model 854-MB) 30 x 140 | ea | $325.10 | |
| CLA603 | Conveyor Belt, Mesh (Model 860-MB) | ea | $345.10 | |
| CLA605 | 807-40 | Conveyor Belt Over Roller Conversion Kit, Mesh (Model 854) 25 x 147.75 w/ loops uses existing roller (73 rollers) | ea | $395.90 |
| CLA608 | Conveyor Belt Over Roller Conversion Kit, Mesh (Model 851) | ea | $225.00 | |
| CLA609 | Conveyor Belt Over Roller Conversion Kit, Mesh (Model 852) | ea | $310.00 | |
| CLA610 | 73-453 | Curtain, Tunnel (Set - Front & Rear) | ea | $55.90 |
| CLA673 | 77-500 | Conveyor Roller 120 | ea | $82.90 |
| CLA674 | 789-1 | Collar, Shaft 1/2" 120 (GR2X568) | ea | $6.50 |
| CLA675 | 790-4 | Sprocket, Drive - Roller (12T) 110, 120 | ea | |
| CLA676 | 790-4 | Sprocket, Drive - Motor (24T, #25) 110, 120 | ea | |
| CLA677 | 804-5 | Chain, Sprocket - Drive #25 110, 120 | ea | |
| CLA711 | 203-61 |
DC Drive Board, Conveyor Model 120 (replaces 203-11 and 233-5) |
ea | $112.50 |
| CLA712 | 203-11 | Powerstat, Conveyor Model 110 (obs) | ea | $110.00 |
| CLA713 | 233-5 | Rectifier, Conveyor Model 110 (obs) | ea | $51.80 |
| CLA714 | Fuse Holder | ea | $8.90 | |
| CLA715 | 215-18 | Switch, Conveyor Power Toggle, SPST | ea | $19.70 |
| LUB001 | Hi-Temp Lubricant for Live/Dead Roller Conveyor Chains, 1/2 Pint | ea | $6.85 | |
